Asus KFN4-D16 User Guide - Page 75

PIO Mode [Auto] Selects the PIO mode. Configuration options: [Auto] [0] [1] [2] [3] [4] SMART Monitoring [Auto] Sets the Smart Monitoring, Analysis, and Reporting Technology. Configuration options: [Auto] [Disabled] [Enabled] 32Bit Data Transfer [Disabled] Enables or disables 32-bit data transfer. Configuration options: [Disabled] [Enabled] 4.3.5 IDE Configuration The items in this menu allow you to set or change the configurations for the IDE devices installed in the system. Select an item then press if you wish to configure the item. IDE Configuration OnBoard PCI IDE Controller SATA0 IDE Interface SATA1 IDE Interface Hard Disk Write Protect IDE Dectect Time Out (Sec) ATA(PI) 80Pin Cable Detection Configuration nVidia RAID ROM [Both] [Enabled] [Enabled] [Disabled] [35] [Host] DISABLED: disables the intergrated IDE Controller. PRIMARY: enables only the Primary IDE Controller. SECODARY: enables only the Secondary IDE Controller. BOTH: enables both IDE Controllers. OnBoard PCI IDE Controller [Enabled] Enables or disables primary IDE controllers. Configuration options: [Disabled] [Enabled] SATA0 IDE Interface [Enabled] Enables or disables the SATA0 IDE Interface. Configuration options: [Disabled] [Enabled] SATA1 IDE Interface [Enabled] Enables or disables the SATA1 IDE Interface. Configuration options: [Disabled] [Enabled] Hard Disk Write Protect [Disabled] Enables or disables the hard disk wirte protection. This will be effective only if device is accessed through BIOS. Configuration options: [Disabled] [Enabled] 4-14 Chapter 4: BIOS setup