Asus KFN4-D16 User Guide - Page 81

SATA Spread Spectrum [Disabled] Enables or disables the SATA spread spectrum. Configuration options: [Disabled] [Enabled] PCI-Express Spread Spectrum [Disabled] Enables or disables the PCI-Express spread spectrum. Configuration options: [Disabled] [Enabled] Hyper Transport Configuration The sub-menu allows you to change the Hyper Transport settings. Hyper Transport Configuration NODE0: NODE1 HT Link Speed NODE0: NODE1 HT Link Width NODE0: SB HT Link Speed NODE0: SB HT Link Width [Auto] [Auto] [Auto] [Auto] The Hyper Transport link will run at this speed if it is slower than or equal to the system clock and the board is capable. Select Screen Select Item +- Change Option NODE0: SB HT Link Speed [Auto] F1 General Help F10 Save and Exit Enables or disables the SB HT Link Speed. ESC Exit Configuration options: [Auto] [200 MHz] [400 MHz] [600 MHz] [800 MHz] [1 GHz] NODE0: SB HT Link Width [Auto] Enables or disables the SB HT Link Width. Configuration options: [Auto] [8 Bit] [16 Bit] 4.4.3 Onboard Devices Configuration Advanced Onboard Devices Settings Serial Port1 Address Serial Port2 Address Serial Port2 Mode Onboard VGA Onboard SAS Onboard BCM5721 LAN Onboard LAN Boot ROM [3F8/IRQ4] [2F8/IRQ3] [Normal] [Enabled] [Enabled] [Enabled] [Disabled] Allows BIOS to Select Serial Port1 Base Addresses. Serial Port1 Address [3F8/IRQ4] Allows you to select the Serial Port1 base address. Configuration options: [Disabled] [3F8/IRQ4] [3E8/IRQ4] 4-20 Chapter 4: BIOS setup