Asus KFN4-D16 User Guide - Page 89

Resume On PS/2 Mouse [Disabled] When set to [Enabled], this parameter allows you to use the PS/2 mouse to turn on the system. This feature requires an ATX power supply that provides at least 1A on the +5VSB lead. Configuration options: [Disabled] [Enabled] Restore on AC Power Loss [Last State] When set to Power Off, the system goes into off state after an AC power loss. When set to Power On, the system goes on after an AC power loss. When set to Last State, the system goes into either off or on state, whatever the system state was before the AC power loss. Configuration options: [Power Off] [Power On] [Last State] Enable PCIE Device Wake [Disabled] Allows you to enable or disable the PCIE Device to generate a wake event. Configuration options: [Disabled] [Enabled] 4.5.5 Hardware Monitor Hardware Monitor CPU1 Temperature CPU2 Temperature MB Temperature CPU Fan1 Speed CPU Fan2 Speed Front Fan1 Speed Front Fan2 Speed Rear Fan1 Speed Rear Fan2 Speed Smart Fan Control CPU1 Target Temperature CPU2 Target Temperature MB Target Temperature VCORE1 Voltage VCORE2 Voltage [38ºC/100ºF] [41ºC/105.5ºF] [47ºC/114ºF] [3884RPM] [3648RPM] [1917RPM] [N/A] [N/A] [N/A] [Enabled] [060] [060] [050] [ 1.320V] [ 1.320V] CPU1 Temperature Use the arrow down key to display additional items. 5V Voltage 5VSB Voltage VBAT Voltage 12V Voltage [ 5.094V] [ 4.980V] [ 3.120V] [12.053V] CPU1/CPU2 Temperature [xxxºC/xxxºF] MB Temperature [xxxºC/xxxºF] The onboard hardware monitor automatically detects and displays the motherboard and CPU temperatures. Select [Ignored] if you do not wish to display the detected temperatures. 4-28 Chapter 4: BIOS setup