Asus P2B-N P2B-N User Manual - Page 18
ASUS P2B-N User's Manual, 3V Voltage Selection VIO, LAN Setting LANDIS_EN, Setting, LANDIS EN - p2b motherboard
View all Asus P2B-N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
3. H/W SETUP Motherboard Settings 3. HARDWARE SETUP 1) +3V Voltage Selection (VIO) This jumper allows you to select the voltage supplied to the DRAM, chipset, AGP, and the CPU's I/O buffer. IMPORTANT! Setting this jumper to High Volt (3.5V) may cause your system to become unstable. It is strongly recommended that you leave this jumper on its default setting of Normal Volt (3.3V). VIO Setting Normal Volt [2-3] (default) High Volt [1-2] VIO 3 2 1 Normal Voltage (default) P2B-N Voltage Input/Output Selection VIO 3 2 1 High Voltage R R 2) LAN Setting (LANDIS_EN) The onboard Intel 10/100 Fast Ethernet may be enabled or disabled using this jumper. The default is set to Enable. LANDIS EN Setting Enable [2-3] (default) Disable [1-2] LANDIS_EN 3 2 1 Disable (Default) LANDIS_EN 3 2 1 Enable P2B-N Onboard LAN Setting 18 ASUS P2B-N User's Manual