Asus P2B-N P2B-N User Manual - Page 39
ASUS P2B-N User's Manual, IDE Connectors, 1 pins, 5 Floppy Disk Drive Connector 34-1 pin FLOPPY
View all Asus P2B-N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
3. H/W SETUP Connectors 3. HARDWARE SETUP 6) IDE Connectors (40-1 pins) This connector supports the provided IDE hard disk drive ribbon cable. After connecting one end to the riser card, connect the other end to a hard disk drive. The primary IDE channel supports both a master and a slave IDE device, but some system housings only permit a standard IDE hard drive to be installed. NLX-R (Back) ® B9-N YEONG-YANG IDE Connectors B9-N (Front) Yeong-Yang (Front) Pin 1 Orient the red stripe on the IDE ribbon cable to Pin 1 7) 3.5" Floppy Disk Drive Connector (34-1 pin FLOPPY) This connector supports the provided floppy drive ribbon cable. After connecting the single end to the riser card, connect the other end to a 3.5" floppy disk drive. (Pin 5 is removed to prevent inserting in the wrong orientation when using ribbon cables with pin 5 plugged.) ® NLX-R NLX-R (Front) NLX-R Riser Pin 1 ® B9-N B9-N (Front) YEONG-YANG Yeong-Yang (Front) Floppy Disk Drive Connector Orient the red stripe on the floppy ribbon cable to Pin 1 B9-N & Yeong-Yang Risers Pin 1 ASUS P2B-N User's Manual 39