Asus P2B-N P2B-N User Manual - Page 28
ASUS Smart Thermal Solutions
View all Asus P2B-N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
3. H/W SETUP CPU 3. HARDWARE SETUP 3.6.4 ASUS Smart Thermal Solutions (only with optional hardware monitor) ASUS provides two smart solutions to Slot 1 CPU thermal problems: the ASUS Smart Fan or ASUS S-P2FAN and the ASUS P2T-Cable. ASUS S-P2FAN Thermal Cable CPU Fan Cable The optional ASUS Smart Fan or ASUS S-P2FAN is a CPU (2 black wires) (3 colored wires) fan for a Pentium® II processor packaged in an SECC. Un- like other CPU thermal solutions, the ASUS S-P2FAN has an integrated thermal sensor located near the center of the CPU heat source. The sensor is optimized by ASUS to give the most accurate reading of the CPU temperature, thus provides the best protection to your computer system. To Use the ASUS S-P2FAN See 2. Attach the Heatsink on the preceding page for the relevant procedures. Note that the S-P2FAN comes with a rock arm design for easy FAN/CPU installation. ASUS P2T-Cable The optional ASUS P2T-Cable can be used for a Pentium® III/II processor packaged in an SECC2/SECC, or a Celeron™ processor packaged in an SEPP. NOTE: The ASUS P2T-Cable can only be used in a Slot 1 motherboard with a 2-pin thermal sensor connector. Sensor Sensor Connector Plug To Use the ASUS P2T-Cable NOTE: The following procedures assume that you have properly attached a heatsink onto an SECC2/SECC/SEPP. 1. Simply peel off the tab from the sensor and then stick the sensor near the middle edge of the Intel boxed processor heatsink with fan (middle) or to either the upper or lower edge of the Celeron™ heatsink (right), as indicated. Tab Sensor ← OR STICK ABOUT HERE 28 ASUS P2B-N User's Manual