Asus P2B98-XV P2B98-XV User Manual - Page 29
SB-Link™ Connector 6-1 pin SBLINK
View all Asus P2B98-XV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
III. INSTALLATION Connectors III. INSTALLATION 12. Wake-On-LAN Connector (3-pin WOL_CON) These connector connects to LAN cards with a Wake-On-LAN output, such as the ASUS PCI-L101 (see ASUS LAN Card section). The connector powers up the system when a wakeup packet or signal is received through the LAN card. IMPORTANT: This feature requires that the Wake-On-LAN Power Up Control is set to Enabled (see Power Management Setup) and that your system has an ATX power supply with at least 720mA +5V standby power. PME Ground +5 Volt Standby IMPORTANT: Requires an ATX power supply with at least 720mA +5-volt standby power P2B98-XV Wake-On-LAN Connector 13. SB-Link™ Connector (6-1 pin SBLINK) Using Intel's PC-PCI and serialized IRQ protocols found in this motherboard's AGPset, this connector allows Sound Blaster 16 compatibility to AWE64D (Digital) or other PCI audio cards, enabling users to play Real-mode DOS games and multimedia applications. SB-Link acts as a bridge between the motherboard and the PCI audio card by providing the DMA and IRQ signals present in the ISA bus but not available on the PCI bus. 1 PC/PCI Grant Sideband Signal PC/PCI Request Sideband Signal DGND 5 2 DGND Serial IRQ 6 DMA_HEADER NOTE: Pin 3 is removed to ensure the correct orientation of the cable on it. P2B98-XV SB-Link™ Connector ASUS P2B98-XV User's Manual 29