Asus P3PH4 P3-PH4 User''s Manual for English Edition - Page 35
IDE hard disk drive installation, Uninstalling a hard disk drive - pundit p3 ph4 power supply
View all Asus P3PH4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
2.9.3 IDE hard disk drive installation Set the IDE HDD as master device before connecting the IDE cable and power plug. Refer to the HDD documentation for details. To install an IDE hard disk drive: 1. Follow steps 1 to 2 of the previous section. 2. Connect the IDE cable (gray connector) to the IDE interface at the back of the drive. Match the red stripe on the cable with Pin 1 on the IDE interface. 3. Connect a power cable from the power supply unit to the power connector at the back of the drive. 4. Follow steps 5 to 6 of the previous section to complete installation. 2.9.4 Uninstalling a hard disk drive In the future, you may have to upgrade or replace a defective hard disk drive. To uninstall the hard disk drive: 1. Press the HDD screw lock (A), then push the drive out from the bay (B) until the drive screws are released from the screw rails. B A 2. Slightly lift the HDD, then remove all plugs at the back of the drive. 3. Install a new HDD following the instructions in the previous section. ASUS Pundit P3-PH4 2-19