Asus PR-DLSR PR-DLSR User Manual - Page 72

Onboard SCSI BIOS [Auto] [Auto] allows the motherboard BIOS to detect whether you have a Adaptec SCSI controller. If the SCSI controller is detected, the SCSI BIOS will be enabled. If no SCSI controller is detected, the onboard SCSI BIOS will be disabled. Setting to [Disabled] deactivates the onboard SCSI BIOS so that the BIOS on an add-on SCSI card can be used. If your SCSI card does not have a BIOS, the SCSI card will not function. Configuration options: [Auto] [Disabled] Onboard SCSI Primary Term [Enabled] Onboard SCSI Secondary Term [Enabled] This field allows you to enable or disable the onboard termination for the primary and secondary SCSI channels. Configuration options: [Enabled] [Disabled] Primary VGA BIOS First [PCI VGA Card] This field allows you to select the primary graphics card. Configuration options: [PCI VGA Card] [Onboard VGA] USB Function [Enabled] Set this field to [Enabled] if you want to use Universal Serial Bus devices. Configuration options: [Disabled] [Enabled] Onboard LAN Boot ROM [Enabled] Onboard 2nd LAN Boot ROM [Enabled] When set to [Enabled], these fields allow the system to boot from the network using the onboard LAN controller boot ROM. Configuration options: [Disabled] [Enabled] 4-20 Chapter 4: BIOS Setup