Asus RS260-E4 RX8 Service Guide - Page 146
Viewing SAS topology
View all Asus RS260-E4 RX8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
6.2.5 Viewing SAS topology 1. From the Adapter Properties screen, select SAS Topology. LSI Logic Config Utility v6.08.05.00 (2006.08.02) Adapter Properties -- SAS1068 Adapter PCI Slot PCI Address(Bus/Dev/Func) MPT Firmware Revision SAS Address NVIDIA Version Status Boot Order Boot Support SAS1068 00 05.03.00 1.15.00.00-IR 500E0180:60831008 25.02 Disabled 0 (Enabled OS only) RAID Properties SAS Topology Advanced Adapter Properties Esc = Exit Menu F1/Shift+1 = Help Enter = Select Item -/+ = Change Item Press to display device properties, or to display more keys. More keys for the SAS Topology display: C = Clear Device Mappings for Non-Present Devices R = Refresh SAS Topology Enter = On a SAS Enclosure or Expander - Expand or Collapse Item Enter = On a Disk Drive - Turn on the Locate LED (next key press turns off) 2. Information about the volume and its member-disks are then displayed. LSI Logic Config Utility v6.08.05.00 (2006.08.02) SAS Topology -- SAS1068 Device Identifier Device SAS1068105:03:001 Info ﹂ Enclosure Direct Attach Devices Controller ﹂ Bay 0 RAID Physical Disk SAS Bay 1 SEAGATE ST373454SS 0003 SAS Bay 2 RAID Physical Disk SAS Bay 3 RAID Physical Disk SAS ﹂ IS VOL LSILOGICLogical Volume 3000 Esc=Exit F1=Help Alt+D=Device Properties Alt+N=More Keys 6-18 Chapter 6: RAID configuration