Asus RS260-E4 RX8 Service Guide - Page 72
Keyboard power 3-pin KBPWR1, VGA controller setting 3-pin VGA_EN1
View all Asus RS260-E4 RX8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
4. Keyboard power (3-pin KBPWR1) This jumper allows you to enable or disable the keyboard wake-up feature. Set this jumper to pins 2-3 (+5VSB) to wake up the computer when you press a key on the keyboard (the default is the Space Bar). This feature requires an ATX power supply that can supply at least 1A on the +5VSB lead, and a corresponding setting in the BIOS. KBPWR1 12 23 +5V (Default) +5VSB ® DSBF-D12/2U/SAS Keyboard power setting 5. VGA controller setting (3-pin VGA_EN1) These jumpers allow you to enable or disable the onboard VGA controller. Set to pins 1-2 to activate the VGA feature. ® DSBF-D12/2U/SAS VGA setting VGA_EN1 12 23 Enable (Default) Disable 4- Chapter 4: Motherboard information
4-8
Chapter 4: Motherboard information
4.
Keyboard power (3-pin KBPWR1)
This jumper allows you to enable or disable the keyboard wake-up feature.
Set this jumper to pins 2-3 (+5VSB) to wake up the computer when you press
a key on the keyboard (the default is the Space Bar). This feature requires
an ATX power supply that can supply at least 1A on the +5VSB lead, and a
corresponding setting in the BIOS.
5.
VGA controller setting (3-pin VGA_EN1)
These jumpers allow you to enable or disable the onboard VGA controller.
Set to pins 1-2 to activate the VGA feature.
DSBF-D12/2U/SAS Keyboard power setting
KBPWR1
(Default)
+5V
+5VSB
3
2
2
1
DSBF-D12/2U/SAS VGA setting
VGA_EN1
1
2
23
Enable
(Default)
Disable