Asus RS260-E4 RX8 Service Guide - Page 28
Central Processing Unit CPU - support
View all Asus RS260-E4 RX8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
2.2 Central Processing Unit (CPU) The motherboard comes with two surface mount 771-pin socket and designed for the Intel® Xeon™ processors. Note in the illustration that the CPU has a gold triangular mark on one corner. This mark indicates the processor Pin 1 that should match a specific corner of the CPU socket. CPU1 CPU2 ® DSBF-D12/2U/SAS CPU LGA771 2.2.1 Installing a CPU • The motherboard supports either one or two CPUs. If you are installing only one CPU, you MUST install it in CPU socket 1. • Remove the dummy heatsink if you want to install the second CPU. To install a CPU: 1. Locate the CPU socket on the motherboard. Incorrect installation of the CPU into the socket may bend the pins and severely damage the CPU! 2. Press the load lever with your thumb (A), then move it to the left (B) until it is released from the retention tab. Retention tab A Load lever PnP cap B This side of the socket box should face you. To prevent damage to the socket pins, do not remove the PnP cap unless you are installing a CPU. 2- Chapter 2: Hardware setup