Asus RS260-E4 RX8 Service Guide - Page 38
Hard disk drives
View all Asus RS260-E4 RX8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
2.4 Hard disk drives To install a hard disk drive: 1. Open the front bezel to access the hot-swap drive trays. 2. Release a drive tray by pushing the spring lock to the right, then pulling the tray lever outward. The drive tray ejects slightly after you pull out the lever. 3. Firmly hold the tray lever and pull the drive tray out of the bay. 4. An empty drive tray includes a metal bracket for support. Use a Phillips (cross) screwdriver to remove the bracket if you wish to install a hard disk in the drive tray. Metal bracket 2-18 Chapter 2: Hardware setup
Chapter 2:
Hardware setup
2-18
2.4
Hard disk drives
To install a hard disk drive:
1.
Open the front bezel to access the
hot-swap drive trays.
2.
Release a drive tray by pushing the
spring lock to the right, then pulling
the tray lever outward. The drive
tray ejects slightly after you pull out
the lever.
3.
Firmly hold the tray lever and pull
the drive tray out of the bay.
4.
An empty drive tray includes a metal
bracket for support. Use a Phillips
(cross) screwdriver to remove the
bracket if you wish to install a hard
disk in the drive tray.
Metal bracket