Asus RS260-E4 RX8 Service Guide - Page 69
Secure the motherboard with screws. Refer to Screw holes
![]() |
View all Asus RS260-E4 RX8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
3. Press the upper spring hooks inward, then insert to the upper CPU heatsink holes until they snap in place. 4. Press the lower spring clips inward, then insert to the lower CPU heatsink holes until they snap in place. 5. If you installed a second CPU, repeat steps 2 to 4 to install the CEK spring to the CPU2 heatsink holes. 6. Install the motherboard with the external I/O ports toward the chassis rear panel. The CPU sockets should be right on top of their respective standoffs. CPU1 socket CPU2 socket Make sure that the standoffs perfectly match the CEK spring screw holes; otherwise, you can not install the CPU heatsinks properly. 7. Secure the motherboard with screws. Refer to section "4.1.1 Screw holes" for illustration. ASUS RS260-E4/RX8 4-
![](/manual_guide/products/asus-rs260e4-rx8-service-guide-daf0f2c/69.png)