Asus RS260-E4 RX8 Service Guide - Page 153

6. Place a blank, high-density floppy disk to the floppy disk drive, then select the type of RAID driver disk you want to create by typing the number before the option 7. Press . 8. Follow screen instructions to create the driver disk. For systems with Red Hat® Enterprise versions that are not listed in the Makedisk menu, explore the support CD and copy the RAID driver disk from the following path: For Intel® 6321 LSI MegaRAID: \Drivers\6321 LSI MegaRAID\Driver\Linux\ For LSI 1068 SAS: \Drivers\LSI 1068\Driver\Linux\ The paths above may differ based on variant models. 7.1.2 Installing the RAID controller driver Windows® 2000/2003 Server OS When installing the LSI 1068 driver to your OS, make sure the driver you are installing supports your current installed OS. We STRONGLY RECOMMEND that you use the LSI 1068 SAS utility bundled in the support CD to create a driver disk. Refer to page 6-1 for more information. During Windows® 2000/2003 Server OS installation To install the RAID controller driver when installing Windows® 2000/2003 Server OS: 1. Boot the computer using the Windows® 2000/2003 Server installation CD. The Windows® 2000/2003 Setup starts. 2. Press when the message "Press F6 if you need to install a third party SCSI or RAID driver..." appears at the bottom of the screen. 3. When prompted, press to specify an additional device. ASUS RS260-E4/RX8 7-