Asus T2-PE1 T2-PE1 English User Manual E2151 - Page 28
Installing a DIMM
View all Asus T2-PE1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
104 Pins 80 Pins DIMM1 DIMM2 2.6 Installing a DIMM The system motherboard comes with two Double Data Rate (DDR) Dual Inline Memory Module (DIMM) sockets. The following figure illustrates the location of the sockets: ¤ 184-pin DDR DIMM sockets 2.6.1 Memory configurations You may install up to 2 GB system memory using 256 MB, 512 MB, and 1 GB DDR DIMMs. • Installing DDR DIMMS other than the recommended configurations may cause memory sizing error or system boot failure. Use any of the recommended configurations in the table on the next page. • Install only i d e n t i c a l (the same type and size) DDR DIMM in DIMM1 and DIMM2. • Always install DIMMs with the same CAS latency. For optimum compatibility, we recommend that you obtain memory modules from the same vendor. • The total memory detected by the system depends on the onboard VGA shared memory setting. 2-10 Chapter 2: Basic installation