Asus T2-PE1 T2-PE1 English User Manual E2151 - Page 41

Reinstalling the power supply unit

Get Asus T2-PE1 PDF manuals and user guides View all Asus T2-PE1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

2.11 Reinstalling the power supply unit Reinstall the power supply unit (PSU) after installing the system components and reconnecting the cables, . To reinstall the PSU: 1. Connect the two 4-pin 12 V power plugs to the ATX12V1 and ATX12V2 connectors on the motherboard. See page 4-6 for the location of these connectors. 2. Connect the 24-pin ATX power plug to the EATXPWR connector on the motherboard. See page 4-6 for the location of this connector. 2 1 1 3. Position the PSU over the chassis. 4. Align the PSU side hook with the metal slot located on the side of the optical drive bay. 5. Slide the PSU toward the direction of the rear panel until it fits in place. 6. Secure the PSU with the screw you removed earlier. Make sure the PSU cables do not interfere with the CPU and/or chassis fans. 4 5 6 3 7 ASUS T2-PE1 2-23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
2-23
2-23
2-23
2-23
2-23
ASUS T2-PE1
ASUS T2-PE1
ASUS T2-PE1
ASUS T2-PE1
ASUS T2-PE1
2.11
Reinstalling the power supply unit
Reinstall the power supply unit (PSU) after installing the system
components and reconnecting the cables, .
To reinstall the PSU:
1.
Connect the two 4-pin 12 V
power plugs to the ATX12V1 and
ATX12V2 connectors on the
motherboard. See page 4-6
for
the location of these connectors.
2.
Connect the 24-pin ATX power
plug to the EATXPWR connector
on the motherboard. See page
4-6 for the location of this
connector.
3.
Position the PSU over the
chassis.
4.
Align the PSU side hook with the
metal slot located on the side of
the optical drive bay.
5.
Slide the PSU toward the
direction of the rear panel until it
fits in place.
6.
Secure the PSU with the screw
you removed earlier.
Make sure the PSU cables do
not interfere with the CPU
and/or chassis fans.
4
3
5
6
1
7
1
2