Asus TRL-DLS TRL-DLS User Manual - Page 60
Plug & Play O/S [No], Reset Configuration Data [No], MPS 1.4 Support [Enabled], Quick Power
View all Asus TRL-DLS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
4. BIOS SETUP Plug & Play O/S [No] This field allows you to use a Plug-and-Play (PnP) operating system to configure the PCI bus slots instead of using the BIOS. When [Yes] is selected, interrupts may be reassigned by the OS. When a non-PnP OS is installed or you want to prevent reassigning of interrupt settings, select the default setting of [No]. Configuration options: [No] [Yes] Reset Configuration Data [No] The Extended System Configuration Data (ESCD) contain information about nonPnP devices. It also holds the complete record of how the system was configured the last time it was booted. Select [Yes] if you want to clear these data during the PowerOn-Self-Test (POST). Configuration options: [No] [Yes] MPS 1.4 Support [Enabled] This field allows you to enable or disable the MultiProcessor Specification 1.4 support. Configuration options: [Disabled] [Enabled] Quick Power On Self Test [Enabled] This field speeds up the Power-On-Self Test (POST) routine by skipping retesting a second, third, and fourth time. Configuration options: [Disabled] [Enabled] Boot Up Floppy Seek [Enabled] When enabled, the BIOS seeks the floppy disk drive once during bootup. Configuration options: [Disabled] [Enabled] 4. BIOS SETUP Boot Menu 60 ASUS TRL-DLS User's Manual