Asus ZenBeam E2 User Guide - Page 25
WARNING, IMPORTANT, in an explosion or the leakage of flammable liquid or gas.
View all Asus ZenBeam E2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
IMPORTANT! • Use only the bundled power adapter to charge the battery pack and supply power to your LED projector. • Ensure that your LED projector is connected to the power adapter before turning it on for the first time. Always plug the power cord into a wall socket without using any extension cords. For your safety, connect this device to a properly grounded electrical outlet only. • The socket outlet must be easily accessible and near your LED projector. • To disconnect your LED projector from its main power supply, unplug your LED projector from the power socket. WARNING! Read the following precautions for your LED projector's battery: • The battery capacity will vary depending on the environment temperature, humidity, and LED Projector usage. • The battery used in this device may present a risk of fire or chemical burn if removed or disassembled. • Follow the warning labels for your personal safety. • Risk of explosion if battery is replaced by an incorrect type. • DO NOT dispose of in fire. • Never attempt to short-circuit your LED projector's battery. • Never attempt to disassemble and reassemble the battery. • Discontinue usage if leakage is found. • The battery and its components must be recycled or disposed of properly. • Keep the battery and other small components away from children. • Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion; • Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; • A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas. LED projector E-Manual 25