Behringer MODEL D Quick Start Guide - Page 21
MODEL D System Exclusive Commands - used
View all Behringer MODEL D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
40 MODEL D MODEL D System Exclusive Commands Some parameters in the MODEL D synthesizer can be changed using MIDI system exclusive (SysEx) commands. A MIDI utility such as the popular MIDI OX can be used to send the SysEx command data string to the MODEL D using the USB MIDI conection between a host computer and the MODEL D. SysEx Data Format The following data format is used when creating a SysEx message (with the data beginning with F0 and ending with F7). F0 00 20 32 aa bb cc dd ee ff F7 The various items in this SysEx data string are described below: Item 00 20 32 aa bb cc dd ee ff Description Manufacturer SysEx ID number (Behringer GmbH) Reserved Device ID: 00-0xF (must match hardware device ID), or 7F to address all devices. Note: This is the same as the Poly Chain ID. It is not the MIDI Channel Main parameter number (see Command Table below) Sub parameter number (see Command Table below) Parameter value MSB (will be zero unless the parameter value is greater than 127) Parameter value LSB (Range is 0 to 127) (see Command Table below) Command Table cc (Main) dd Description (Sub) ff (Para Range) 00 MIDI Channel 0 to 15 01 Key Priority 0-LOW (In poly chain mode, 1-HIGH note priority will be 2-LAST restricted to 'LOW') 02 Multi Trigger 0-OFF 1-ON (1.05 style) 2-ON (1.06 style) 03 Pitch Bend 0 to 12 semitones (Pitch wheel range) Effective when pitch bend range not fixed. See "OC Pitch bend mode" below Default 0 0- LOW 0- OFF 12 0xA Global Setting 06 MIDI IN Transpose 0 to 24 12 The range is -12 to + 12, so 12 is no transpose 07 MIDI Note Zero Volts 0 to 127 36 08 Poly Chain* see note below 0-OFF, 1-ON 0- OFF 09 Device ID 0-15 0 (Poly Chain ID) 0A Enable/Disable MIDI 0- Enable 0-Enable Channel Switches 1- Disable 0B Modulation Curve 0- Soft 1- Med 2- Hard 0- Soft OC Pitch Bend Mode 0- PitchBend 0- Fixed Range Fixed 1- PitchBend Range Settable OD Poly Chain Style 0- New Style 0- New 1- Old Style Style 0xB Restore Global Settings 0xE Start User Pitch CV Calibration 0xF Restore Default CV Calibration Quick Start Guide 41 *Note: If you use SysEx instead of the recommended A-440 method to turn on the Poly Chain, then the Poly Chain Device ID of other units in the chain is not set automatically. You have to use SysEx to set the Poly Chain ID of the first MODEL D to Device ID=0, the second MODEL D to ID=1, the third MODEL D to ID=3 and so on. All MODEL D units must have the same MIDI channel. Retriggering Style These examples show the difference between the old and new retriggering styles TABLE OF NOTE RESPONSE -- New poly chain style Poly chain How many notes are playing Device no. 0 1 2 3 4 5 6 7 1 Off Note1 Note1 Note1 Note1 Note1 Note1 Note1 2 Off Off Note2 Note2 Note2 Note2 Note2 Note2 3 Off Off off Note3 Note3 Note3 Note3 Note3 4 Off Off Off Off Note4 Note4 Note4 Note4 5 Off Off Off Off Off Note5 Note5 Note5 Example Old style New style (v1.0.5) (v1.0.6) Note: Turning on the Poly Chain will affect the note priority function Press and hold note A. Note A is playing. Then press and hold note B. Note B is playing (A stop). Release note A. Retrigger No Retrigger Command Examples Note: All command parameters should be in hexadecimal format. Press and hold note A. Note A is playing. Then press and hold note B. Note B is playing (A stop). Release note B. Retrigger Retrigger Poly Chain Style These two tables show the difference between old and new poly chain style. TABLE OF NOTE RESPONSE -- Old poly chain style Poly chain How many notes are playing Device no. 0 1 2 3 4 5 6 7 1 Off Note1 Note1 Note1 Note1 Note1 Note1 Note1 2 Off Note1 Note2 Note2 Note2 Note2 Note2 Note2 3 Off Note1 Note1 Note3 Note3 Note3 Note3 Note3 4 Off Note1 Note1 Note1 Note4 Note4 Note4 Note4 5 Off Note1 Note1 Note1 Note1 Note5 Note5 Note5 Function SysEX Command String Set MIDI Channel to 13 F0 00 20 32 00 7F 0A 00 00 0C F7 Set Key Priority to last F0 00 20 32 00 7F 0A 01 00 02 F7 Turn on Multi Trigger (1.05 style) F0 00 20 32 00 7F 0A 02 00 01 F7 Set Pitch Bend semitone to 11 F0 00 20 32 00 7F 0A 03 00 0B F7 Set MIDI IN Transpose to +8 F0 00 20 32 00 7F 0A 06 00 14 F7 Set Note C5 as Zero Volts F0 00 20 32 00 7F 0A 07 00 48 F7 Turn on Poly Chain F0 00 20 32 00 7F 0A 08 00 01 F7 Set Device ID to 5 F0 00 20 32 00 7F 0A 09 00 05 F7 Disable MIDI Channel Switches F0 00 20 32 00 7F 0A 0A 00 01 F7 Set Modulation Curve to Medium F0 00 20 32 00 7F 0A 0B 00 01 F7 Make pitch bend range effective F0 00 20 32 00 7F 0A 0C 00 01 F7 Set poly chain style to F0 00 20 32 00 7F 0A 0D 00 01 F7 old style