Behringer MODEL D Quick Start Guide - Page 24

46 MODEL D Specifications Synthesizer Architecture Number of voices Type Oscillators LFO VCF Envelopes Connectivity MIDI In/Thru USB (MIDI) High output High output impedance Low output Low output impedance Headphones Headphones output impedance USB Type Supported Operating Systems Controllers Section Knobs Switches Oscillator Bank Knobs Switches Monophonic Analog 3 (0.1 Hz to 20 kHz in 6 overlapping ranges) 1 (0.05 Hz to 200 Hz, up to 300 Hz with external CV input) 1 switchable low pass or high pass (24 dB/octave slope) VCA, VCF 5-pin DIN / 16 channels USB 2.0, type B ¼" TS, unbalanced, max. 0 dBu 1.2 kΩ ¼" TS, unbalanced, 30 dB below high output 1 kΩ 3.5 mm TRS, unbalanced, max. -3.5 dBu 8 Ω Class compliant USB 2.0, type B Windows XP or higher Mac OS X 10.6.8 or higher Tune: -2 to +2 Glide: 0 to 10 Modulation mix: (OSC 3 or filter EG) to (noise/ext mod source, or LFO) Modulation depth: 0 to 10 LFO rate: 0 to 10 Modulation source: OSC 3 or filter EG Modulation source: (noise or external modulation source) or LFO LFO waveform: triangular or square Range (OSC 1, 2, and 3): LO, 32', 16', 8', 4', 2' Frequency (OSC 2 and 3): -7 to +7 Waveform (OSC 1 and 2): triangular, triangular/saw, saw, square, wide pulse, narrow pulse Waveform (OSC 3): triangular, reverse saw, saw, square, wide pulse, narrow pulse Oscillator modulation on/off OSC 3 control (by keyboard) on/off Mixer Section Knobs Switches LED Filter Section Knobs Switches Output Section Loudness contour dynamic range: Knobs Switches LED Inputs (TS 3.5 mm) Modulation source Oscillator 1 LFO External input Cutoff frequency Loudness Filter contour Loudness contour Quick Start Guide 47 Volume (OSC 1, 2, and 3): 0 to 10 Volume (external input): 0 to 10 Volume (noise): 0 to 10 OSC 1, 2, and 3: on/off External input: on/off Noise: on/off Noise source: pink or white Overload Cutoff frequency: -4 to +4 Filter emphasis: 0 to 10 Amount of contour: 0 to 10 Attack: 1 ms to 10 s Decay: 4 ms to >35 s Sustain: 0 to 10 Filter mode: low pass/high pass Filter modulation: on/off Keyboard control 1: on (1⁄3) or off Keyboard control 2: on (2⁄3) or off Filter decay: on/off 80 dB Volume: 0 to 10 Headphone volume: 0 to 10 Amount of contour: 0 to 10 Attack: 1 ms to 10 s Decay: 4 ms to >35 s Sustain: 0 to 10 Main output: on/off A-440: on/off Loudness decay: on/off Power Noise is the modulation source if there is no connection present Control voltage: 1 V per octave Control voltage: -5 V to +5 V Input impedance: 1 MΩ Control voltage: 0 to +5 V controls the cutoff frequency Control voltage: 0 to +5 V controls the loudness Gate: +5 V input triggers the filter contour Gate: +5 V input triggers the loudness contour