Beko BDVG693 User Manual - Page 13

Installation M Before installation To ensure that critical air gaps are maintained under the appliance, we recommend that this appliance is mounted on a solid base and that the feet do not sink into any carpet or soft flooring. The kitchen floor must be able to carry the weight of the appliance plus the additional weight of cookware and bakeware and food. minimum distance of 650 mm above the hob surface. • * If a cooker hood is to be installed above the cooker, refer to cooker hood manufacturer' instructions regarding installation height (min 650 mm) • Movement of your appliance is most easily achieved by lifting the front as follows and pulling towards. Open the top oven door and the bottom oven door sufficiently to allow a comfortable grip on the underside front edge of E E E mm min rt-- 65 mmtnin; the oven roofs. While gripping, it should be avoided to damage any grill elements or oven interior furniture. • The appliance corresponds to device class 1, i.e. it may be placed with the rear and one side to kitchen walls, kitchen furniture or equipment of any size. The kitchen furniture or equipment on the other side may only be of the same size or smaller. • Any kitchen furniture next to the A safety distance must be left between appliance must be heat-resistant the appliance and the kitchen walls (100 °C min.). and furniture. See figure (values in mm). i n] The appliance must be secured • It can be used with cabinets on against overbalancing by using either side but in order to have a the supplied safety chain on your minimum distance of 400 mm oven. Fasten hook (1) to the above hotplate level allow a side kitchen wall (5) and connect clearance of 65 mm between the safety chain (2) to the hook. appliance and any wall, partition or tall cupboard. • It can also be used in a free standing position. Allow a 12 I EN