Beko BDVG693 User Manual - Page 33

• To remove the plastic holders (2) , use a flat metal or plastic, e.g., a knife, slotted screwdriver, to free the fixing foot (5). Push the fixing foot through the window (6) in arrow direction. 2 1 Front door 2 Hinge 3 Oven 4 3 2 5 2 6 3 1 Metal part 2 Plastic carrier 3. Move the front door to half-way. 3 Inner glass panel 4. Remove the front door by pulling it 4 Lower plastic slot upwards to release it from the right 5 Fixing foot and left hinges. 6 Window El Steps carried out during removing process should be performed in reverse order (steps 3 4, 3, 2 and 1) to reattach the door. Do not forget to close the 4 clips at the hinge housing when reinstalling the door. Removing the door inner glass • Pull the inner glass panel (3) The inner glass panel of the oven door towards yourself until it detaches at upper oven can be removed for from its plastic slots (4). cleaning. • When reinstalling the glass panel, • Open the oven door. make sure that it is seated into the • Remove the metal part (1) by plastic slots. removing two screws that secure it. 32 I EN