Beko BDVG693 User Manual - Page 16

1 2 3 4 7 6 5 1 Shut-off valve 2 Adapter (optional) 1/2" outlet 3 Extension pipe 4 Valve with right angled elbow 5 Cooker hose with bayonet fitting 6 Connection piece 7 Gas feeding tube itt Risk of explosion by damage of the cooker hose! The cooker hose must not be clamped, bent or trapped or come into contact with hot parts of the appliance. Connection to the mains supply This appliance must be earthed! Our company shall not held responsible for any damage caused by using the appliance without earthed socket. A Risk of electric shock, short circuit or fire by unprofessional installation! The appliance may be connected to the mains supply only by an authorized qualified person and the appliance is only guaranteed after correct installation. A Risk of electric shock, short circuit or fire by damage of the mains lead! The mains lead must not be clamped, bent or trapped or come into contact with hot parts of the appliance. If the mains lead is damaged, it must be replaced by a qualified electrician. The mains supply data must correspond to the data specified on the rating plate of the appliance. The rating plate is either seen when the door or the lower cover is opened or it is located at the rear wall of the appliance depending on the appliance type. The supply cable of the appliance must correspond to the specifications; see technical data table Technical Data, page 5. The plug should be easily accessible after installation (but not above the hob). The moulded plug on this appliance incorporates a 13A fuse. Should the fuse need to be replaced an ASTA approved BS1362 fuse of the same rating must be used. Do not forget to refit the fuse cover. In the event of losing the fuse cover, the plug must not be used until a replacement fuse 151 EN