Beko BDVG693 User Manual - Page 15

Region

Get Beko BDVG693 PDF manuals and user guides View all Beko BDVG693 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

dt Risk of explosion! Before starting any work on the gas installation, please shut off the gas supply. • "The adjustment conditions for this appliance are stated on the label (or data plate)." • In the UK, Gas Safe registered installers (Including the Regions of British Gas) undertake to work to safe and satisfactory standards. Regulations The cooker must be installed in accordance with the Gas Safety (Installation and Use) Regulations and the relevant Building Regulations in force. Hot Region [I] Your appliance is adjusted for Natural gas. The cooker is designed for UK installation using a flexible connection with tubing in accordance with the regulations in force. Length of 900mm is recommend. Make sure that the natural gas valve is readily accessible. Service Representative will remove the plug during connection and connect your appliance by means of a straight connection device (coupling). If a flexible hose is used it must not come into contact with the top 150nnm/6 inches (the hot region on the diagram) of the rear of the appliance. Do not pass the hose through the hot region behind the oven. CD If you need to use your appliance later with a different type of gas, you must consult an authorised service centre for the related conversion procedure. Connecting the gas hose Seal all connections with gas sealant. 1. Shut gas supply. 2. Connect cooker hose (5) to the inlet valve of the oven. 3. Connect safety tube with valve with right angled elbow 4. 141 EN

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
dt
Risk
of
explosion!
Before
starting
any
work
on
the
gas
installation,
please
shut
off
the
gas
supply.
•
"The
adjustment
conditions
for
this
appliance
are
stated
on
the
label
(or
data
plate)."
•
In
the
UK,
Gas
Safe
registered
installers
(Including
the
Regions
of
British
Gas)
undertake
to
work
to
safe
and
satisfactory
standards.
Regulations
The
cooker
must
be
installed
in
accordance
with
the
Gas
Safety
(Installation
and
Use)
Regulations
and
the
relevant
Building
Regulations
in
force.
[I]
Your
appliance
is
adjusted
for
Natural
gas.
The
cooker
is
designed
for
UK
installation
using
a
flexible
connection
with
tubing
in
accordance
with
the
regulations
in
force.
Length
of
900mm
is
recommend.
Make
sure
that
the
natural
gas
valve
is
readily
accessible.
Service
Representative
will
remove
the
plug
during
connection
and
connect
your
appliance
by
means
of
a
straight
connection
device
(coupling).
If
a
flexible
hose
is
used
it
must
not
come
into
contact
with
the
top
150nnm/6
inches
(the
hot
region
on
the
diagram)
of
the
rear
of
the
appliance.
Do
not
pass
the
hose
through
the
hot
region
behind
the
oven.
Hot
Region
CD
If
you
need
to
use
your
appliance
later
with
a
different
type
of
gas,
you
must
consult
an
authorised
service
centre
for
the
related
conversion
procedure.
Connecting
the
gas
hose
Seal
all
connections
with
gas
sealant.
1.
Shut
gas
supply.
2.
Connect
cooker
hose
(5)
to
the
inlet
valve
of
the
oven.
3.
Connect
safety
tube
with
valve
with
right
angled
elbow
4.
141
EN