Bernina 2500DCET Manual - Page 22

Needles and machine, Needle and fabric, Needle and thread, Thread /decorative threads, Thread, - problems

Page 22 highlights

2500_DCE_1_englisch_neu 09.10.2007 14:34 Uhr Seite 23 Needles, thread, fabric Needles and machine Your BERNINA overlocker is the BERNINA 2500DCET cover stitch or JLx2 needles 23 equipped with needle system when sewing cover and chain for cover and chain stitch 130/705 H (household need- stitch (Positions F and G). when replacement needles les). However for certain It is important to purchase are required. 23 types of sewing, system JLx2 system 130/705H needles for needles can also be used on overlocking and 23 23 Needle and fabric A Needles must be in perfect condition. Problems can occur if needles: A are bent B are damaged or blunt C have hooked points Needle and thread The needle size used When sewing, the thread is needles no. 70-90 on your depends on the thread. The fed through the long groove BERNINA overlocker. needles hould be in in the needle. If the needle is B accordance with thread used. too fine, the thread does not fit into the groove and stitches will be skipped. Use Thread/decorative threads Sewing and special overlock · Purchase threads on cones · The thicker the thread, the threads are manufactured or spools which are pro- looser the tensions in a wide variety of types, duced exclusively for over- · Sew slowly when using weights and combination locking. decorative threads. Pull the fibres. It is worth investing in · When using normal spools, thread chain gently to the good quality threads for use the spool caps (in rear when starting to sew. perfect sewing results. accessory bag). · Always test sew decorative · Only use decorative threads threads before starting to Decorative threads specially in the loopers. The thread sew your work. C made for overlockers (available on cones) are also must move easily and · Use the deco-guide when without resistance through sewing thick or decorative becoming widely available. the thread guides and threads (see page 36. ) We recommend following looper eyes. basic guidelines when using · The thicker the thread, the special threads on your longer the stitch length overlocker: (3-4). Thread, needle, application table Thread All purpose overlock thread 120/2 (polyester) Polyester-continuous filaments Woolly nylon Spun Polyester Embroidery/darning and decorative threads Needles Where 70-90 Needles-, loopersand wiper threads Loopers only Loopers and wiper only 80-90 Needles-, loopersand wiper threads 70-90 Loopers and wiper only Application For all overlock- and cover stitch work Neatening edges Soft seams in knits, rolled hems Seams in all fabrics Neatening edges, rolled hems and cover stitch applications

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82

Needles, thread, fabric
23
23
23
23
Needles and machine
Your BERNINA overlocker is
equipped with needle system
130/705 H (household need-
les). However for certain
types of sewing, system JLx2
needles can also be used on
Needle and fabric
Needles must be in perfect
condition. Problems can
occur if needles:
A
B
C
Needle and thread
The needle size used
depends on the thread. The
needles hould be in
accordance with thread used.
Thread /decorative threads
Sewing and special overlock
threads are manufactured
in a wide variety of types,
weights and combination
fibres. It is worth investing in
good quality threads for
perfect sewing results.
Decorative threads specially
made for overlockers (avai-
lable on cones) are also
becoming widely available.
We recommend following
basic guidelines when using
special threads on your
overlocker:
the BERNINA 2500DCET
when sewing cover and chain
stitch (Positions F and G).
It is important to purchase
system 130/705H needles for
overlocking and
A are bent
B are damaged or blunt
C have hooked points
When sewing, the thread is
fed through the long groove
in the needle. If the needle is
too fine, the thread does not
fit into the groove and
stitches will be skipped. Use
· Purchase threads on cones
or spools which are pro-
duced exclusively for over-
locking.
· When using normal spools,
use the spool caps (in
accessory bag).
· Only use decorative threads
in the loopers. The thread
must move easily and
without resistance through
the thread guides and
looper eyes.
· The thicker the thread, the
longer the stitch length
(3–4).
· The thicker the thread, the
looser the tensions
· Sew slowly when using
decorative threads. Pull the
thread chain gently to the
rear when starting to sew.
· Always test sew decorative
threads before starting to
sew your work.
· Use the deco-guide when
sewing thick or decorative
threads (see page 36. )
Thread, needle, application table
cover stitch or JLx2 needles
for cover and chain stitch
when replacement needles
are required.
needles no. 70–90 on your
BERNINA overlocker.
Thread
Needles
Where
Application
All purpose overlock thread
70–90
Needles-, loopers-
For all overlock- and cover stitch work
120/2 (polyester)
and wiper threads
Polyester-continuous filaments
Loopers only
Neatening edges
Woolly nylon
Loopers and wiper only
Soft seams in knits, rolled hems
Spun Polyester
80–90
Needles-, loopers-
Seams in all fabrics
and wiper threads
Embroidery/darning and
70–90
Loopers and wiper only
Neatening edges, rolled hems and
decorative threads
cover stitch applications
2500_DCE_1_englisch_neu
09.10.2007 14:34 Uhr
Seite 23