Bernina 2500DCET Manual - Page 66
Sewing circular or tubular items, Unpicking seams
View all Bernina 2500DCET manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
2500_DCE_2_englisch_neu 09.10.2007 15:01 Uhr Seite 66 Practical Sewing - Overlock ▲1 ▲2 ▲3 Sewing circular or tubular items · Cut away a small section of the seam allowance. · Raise the needles (Needle stop). · Raise the presser foot. · Position the fabric under the presser foot so that the edge of the cut is against the knife. · Lower the presser foot. · Sew. · When the seam is complete, sew a few stitches over the previous stitches without cutting. · Raise the tip of the presser foot and turn work away from you. · Sew off the edge (see 1, 2, 3). Unpicking seams Method 1: Cut the loops formed by the looper threads with sharp scissors or the BERNINA seam ripper. Pull slightly on the threads and the seam will come undone (see 4, 5). Method 2: Loosen the loops formed by the needle threads with a pin or your BERNINA seam ripper. Pull first on the needle and then on the looper threads and the seam will come undone (see 6). ▲4 66 ▲5 ▼6