Binatone iDECT L1i User Manual - Page 23

7 CLOCK & ALARM If you subscribe to the Caller Display service, the time and date settings will be automatically updated by the network when you receive a call. The Caller Display service only sends the month and date, not the year, so you may need to set the year. 7.1 Date & Time 7.1.1 Change date format In Idle: 1. Press [ Menu ] and to scroll to Clock/Alarm. 2. Press [ Select ] to show Date & Time. 3. Press [ Select ] to show Date Format. 4. Press [ Select ] and to scroll to your desired date format of either DD-MM-YYYY or MM-DD-YYYY. 5. Press [ Select ] to confirm. 7.1.2 Change time format In Idle mode: 1. Follow steps 1 to 2 in Section 7.1.1. 2. Press [ Select ] and to scroll to Time Format. 3. Press [ Select ] and to scroll to your desired time format of either 12 Hours or 24 Hours. 4. Press [ Select ] to confirm. 7.1.3 Set the date In Idle mode: 1. Follow steps 1 to 2 in Section 7.1.1. 2. Press [ Select ] and to scroll to Set Date. 3. Press [ Select ] and enter the date according to the date format you set in Section 7.1.1. 4. Press [ OK ] to confirm and save the new date. Note: If an invalid date is detected, an error tone will sound and the date will not be accepted. 19