Binatone iDECT L1i User Manual - Page 37

9.5.7.3 Access Your Answering Machine Remotely You can ring your iDECT L1i from another tone-dialling phone to switch the answering machine on or off, or to listen to your messages remotely. 1. Place a call from a tone-dialling phone to your iDECT L1i. 2. When the answering machine answers the call, press the key while the OGM is still playing. 3. Enter the 4-digit Remote Access PIN. Note: The must be entered while the OGM is playing, and the 4 - digit PIN should follow without any delays. If the 4-digit Remote Access PIN is entered incorrectly three times consecutively, the line will be released automatically. 4. Press the following keys to operate the answering machine remotely. L1i system Remote operation 1 Using a tone-dialling phone, dial your home number 2 While your outgoing message is playing, press 3 Key in your remote security code The default code is 0000. For details of how to set a new code, see the User Guide 9.5.7.1 on page 32. Note: The key must be entered while the OGM is still playing, and the 4-digit PIN should follow without any delays. If the 4-digit Remote Access PIN is entered incorrectly three times consecutively, the line will be released automatically. 4 You can also use the codes on the other side of this card Note: If your answering machine is switched off, the phone will enter into the remote access mode after 14 rings. You can then enter the 4-digit remote access PIN (Default Remote Access PIN is 0000) to activate the remote access feature. 33