Binatone iDECT L1i User Manual - Page 36

Activate or Deactivate the Remote Access

Page 36 highlights

9.5.6 Set the Maximum Recording Time for Messages You can set a maximum length for the recording time of each incoming messages, as 60 seconds, 120 seconds,180 seconds, or unlimited up to the available memory of the answering machine. 1. Press [ Menu ] and to scroll to Answer Machine. 2. Press [ Select ] and to scroll toTAM Settings. 3. Press [ Select ] and to scroll to Recording Time. 4. Press [ Select ] and to select 60 Sec, 120 Sec, 180 Sec, or Unlimi.ted 5. Press [ Select ] to confirm your choice. 9.5.7 Remote Access You can check your messages, or otherwise operate your answering machine, by calling the phone when you are away from home and entering a 4-digit remote access PIN using a tone-dialling phone. The 4-digit remote access PIN code is used to prevent other people from unauthorised access of your answering machine. Note: Remote Access must be activated if you want to be able to use this feature, see section 9.5.7.2. 9.5.7.1 Change the 4-Digit Remote Access PIN 1. Press [ Menu ] and to scroll to Answer Machine. 2. Press [Select ] and to scroll to TAM Settings. 3. Press [Select ] and to scroll to Chg Remote PIN. 4. Press [ Select ] and enter the Old remote access PIN (Default Value:0000). Note: If you enter an incorrect PIN, "Old PIN Invalid" is displayed and it returns to Chg Remote PIN menu. 5. Press [ OK ] and enter the new remote access PIN. 6. Press [ OK ] and enter the new remote access PIN again. 7. Press [ OK ] to confirm. Note: If the new PIN entered in Step 6 is not the same as the new remote access PIN entered in Step 5, "New PIN Invalid" is displayed, and you must enter the PIN again from step 5. 9.5.7.2 Activate or Deactivate the Remote Access The remote access must be enabled otherwise the access will not be permitted. 1. Press [ Menu ] and to scroll to Answer Machine. 2. Press [ Select ] and to scroll to TAM Settings. 3. Press [Select ] and to scroll to Remote Access. 4. Press [Select ] and to scroll to On or Off. 5. Press [Select ] to confirm your choice. 32

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45

32
9.5.6
Set the Maximum
Recording Time for Messages
You can set a maximum length for the recording time of each incoming
messages, as 60 seconds, 120 seconds,180 seconds,
or
unlimited up to
the available memory of the answering machine.
1.
Press [ Menu ]
and <UP/DOWN> to scroll to Answer Machine.
2.
Press
[ Select ]
and <UP/DOWN> to scroll toTAM Settings.
3.
Press
[ Select ]
and <UP/DOWN> to scroll to Recording Time.
4.
Press
[ Select ]
and <UP/DOWN> to select
60 Sec, 120 Sec, 180
Sec, or Unlimited
.
5.
Press
[ Select ]
to confirm your choice.
9.5.7
Remote Access
You can check your messages, or otherwise operate your answering
machine, by calling the phone when you are away from home and entering
a 4-digit remote access PIN using a tone-dialling phone. The 4-digit remote
access PIN code is used to prevent other people from unauthorised access
of your answering machine.
Note: Remote Access must be activated if you want to be able to use this
feature, see section 9.5.7.2.
9.5.7.1
Change the 4-Digit Remote Access PIN
1.
Press [ Menu ]
and <UP/DOWN> to scroll to
Answer Machine
.
2.
Press
[Select ]
and <UP/DOWN> to scroll to
TAM Settings
.
3.
Press [Select ]
and <UP/DOWN> to scroll to
Chg Remote PIN
.
4.
Press [ Select ] and enter the Old remote access PIN (Default
Value:0000).
Note: If you enter an incorrect PIN, “
Old PIN Invalid
” is displayed and it
returns to
Chg Remote PIN
menu.
5.
Press [ OK ]
and enter the new remote access PIN.
6.
Press [ OK ] and enter the new remote access PIN again.
7.
Press [ OK ]
to confirm.
Note: If the new PIN entered in Step 6 is not the same as the new remote
access PIN entered in Step 5, “
New PIN Invalid
is displayed, and you
must enter the PIN again from step 5.
9.5.7.2
Activate or Deactivate the Remote Access
The remote access must be enabled otherwise the access will not be
permitted.
1.
Press [ Menu ]
and <UP/DOWN> to scroll to
Answer Machine
.
2.
Press
[ Select ]
and <UP/DOWN> to scroll to
TAM Settings
.
3.
Press
[Select ]
and <UP/DOWN> to scroll to
Remote Access
.
4.
Press
[Select ]
and <UP/DOWN> to scroll to
On
or
Off
.
5.
Press
[Select ]
to confirm your choice.