Binatone iDECT L1i User Manual - Page 24

7.1.4 Set the time In Idle mode: 1. Follow steps 1 to 2 in Section 7.1.1. 2. Press [ Select ] and to scroll to Set Time. 3. Press [ Select ] and enter the time according to the time format you set in Section 7.1.2. Note: If incorrect input is detected, an error tone will be emitted and the cursor will stop at the incorrect input. 4. If in 12-hour mode, press the key to change between AM and PM. 5. Press [ OK ] to confirm. 7.2 Alarm You can use the iDECT L1i handset as an alarm clock. When an alarm is set, the is shown on the handset display. When the alarm time is reached, the and " Alarm On " flash on the display, and the alarm melody is played for 45 seconds or until any handset key is pressed. If the snooze function is activated, the alarm will repeat every 2 minutes, unless or [Off] are pressed while the alarm is sounding. Note: a. A key press will still disable the alarm, even if the handset keypad is locked when the alarm rings. b. The alarm volume level setting is the same as the handset ringer volume. If the handset ringer is set to Volume Off, the alarm still sounds at Volume 1 level. c. During an external or internal call, if an alarm is set and the alarm time is reached, the and "Alarm On " will still flash, but there will be no alarm tone. from the earpiece to alert the user the alarm time is reached. If the user presses a key to stop the alarm or activate the snooze, the display will revert to the call duration screen. d. During ringing, the alarm will not sound when the alarm time is reached, but if the ringing stops within 45 seconds of the alarm time, the alarm will sound, and the snooze function will continue, if set. 7.2.1 Turn off the alarm In Idle mode: 1. Press [ Menu ] and to scroll to Clock/Alarm. 2. Press [ Select ] and to scroll to Alarm. 3. Press [ Select ] and to scroll to Alarm Off. 4. Press [ Select ] to confirm and turn the alarm off. 20