Brother International CS-8060 Users Manual - English - Page 109
Symptom, Probable Cause, Remedy, Reference, The upper, thread breaks., The lower, thread is tangled - troubleshooting
View all Brother International CS-8060 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
CONTENTS GETTING READY SEWING BASICS UTILITY STITCHES Symptom Probable Cause Remedy The upper thread was not threaded correctly (for example, the spool is not installed correctly, the spool cap is too big for the spool being used, or the thread has come out of the needle bar thread hook). Correct the upper threading. There are knots or tangles in the thread. Remove any knots or tangles. The selected needle is not appropri- Select a needle that is appropriate ate for the thread being used. for the type of stitch being used. The upper thread tension is too tight. Loosen the upper thread tension. The upper thread breaks. The thread is tangled, for example, in the shuttle. The needle is bent or blunt. Remove the tangle thread. If the thread is tangled in the shuttle, clean the shuttle. Replace the needle. The needle is incorrectly installed. Correctly install the needle. The area around the hole in the nee- Replace the needle plate. dle plate is scratched, or has a burr Contact your retailer or the nearest on it. authorized service center. The area around the hole in the presser foot is scratched, or has a burr on it. Replace the presser foot. Contact your retailer or the nearest authorized service center. The shuttle is scratched, or has a burr on it. Replace the shuttle. Contact your retailer or the nearest authorized service center. A bobbin designed specifically for this machine is not used. Incorrect bobbins will not work properly. Only use a bobbin designed specifically for this machine. The bobbin thread is incorrectly installed. Correctly install the bobbin thread. The lower thread is tangled or breaks. The bobbin is scratched or does not rotate smoothly, or has a burr on it. The thread is tangled. Replace the bobbin. Remove the tangled thread and clean the shuttle. A bobbin designed specifically for this machine is not used. Incorrect bobbins will not work properly. Only use a bobbin designed specifically for this machine. The upper thread was not threaded correctly. Correct the upper threading. The bobbin thread is incorrectly installed. Correctly install the bobbin thread. The thread tension is incorrect. The combination of fabric, thread and needle is not correct. The presser foot holder is incorrectly installed. Select a thread and needle that are appropriate for the type of fabric being sewn. Correctly install the presser foot holder. The thread tension is incorrect. Adjust the tension of the upper thread. A bobbin designed specifically for this machine is not used. Incorrect bobbins will not work properly. Only use a bobbin designed specifically for this machine. Reference page 18 - page 30 page 50 page 100 page 31 - - - page 12 page 16 - page 100 page 12 page 18 page 16 page 30 page 37 page 50 page 12 APPENDIX INDEX Troubleshooting 103