Brother International CS-8060 Users Manual - English - Page 110

while sewing., The thread does

Get Brother International CS-8060 PDF manuals and user guides View all Brother International CS-8060 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 110 highlights

APPENDIX CONTENTS GETTING READY SEWING BASICS UTILITY STITCHES Symptom The fabric is wrinkled. Stitches are skipped. A high-pitched noise is made while sewing. The thread does not pass through the eye of the needle. The stitch is not sewn correctly. Probable Cause The upper thread was not threaded correctly, or the bobbin is incorrectly installed. The spool is incorrectly installed. The combination of fabric, thread and needle is not correct. The needle is bent or blunt. If thin fabrics are being sewn, the stitch is too coarse. The thread tension is incorrect. The upper thread was not threaded correctly. The combination of fabric, thread and needle is not correct. The needle is bent or blunt. The needle is incorrectly installed. Dust has accumulated under the needle plate or in the shuttle. Dust has accumulated in the feed dogs or in the shuttle. The upper thread was not threaded correctly. The shuttle is scratched, or has a burr on it. A bobbin designed specifically for this machine is not used. The needle was not raised. The thread cassette indicator is lit in red. The needle is incorrectly installed. The presser foot that is used is not appropriate for the type of stitch that you wish to sew. The thread tension is incorrect. The thread is tangled, for example, in the shuttle. Remedy Correctly thread the upper thread and correctly install the bobbin thread. Correctly install the spool. Select a thread and needle that are appropriate for the type of fabric being sewn. Replace the needle. Shorten the stitch length or sew with stabilizer material under the fabric. Adjust the tension of the upper thread. Correct the upper threading. Select a thread and needle that are appropriate for the type of fabric being sewn. Replace the needle. Correctly install the needle. Remove the needle plate cover and clean the shuttle. Clean the shuttle. Correct the upper threading. Replace the shuttle. Contact your retailer or the nearest authorized service center. Incorrect bobbins will not work properly. Only use a bobbin designed specifically for this machine. Press the needle position button. The thread cassette indicator lights up in green. Correctly install the needle. Attach the presser foot that is appropriate for the type of stitch that you wish to sew. Adjust the tension of the upper thread. Remove the tangle thread. If the thread is tangled in the shuttle, clean the shuttle. Reference page 16, 18 page 18 page 30 page 31 page 52 page 50 page 18 page 30 page 31 page 32 page 100 page 100 page 18 - page 12 page 22 page 32 page 96 page 50 page 100 APPENDIX INDEX 104

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
APPENDIX
—————————————————————————————————————————————————————
104
GETTING READY
CONTENTS
SEWING BASICS
UTILITY STITCHES
APPENDIX
INDEX
The fabric is
wrinkled.
The upper thread was not threaded
correctly, or the bobbin is incor-
rectly installed.
Correctly thread the upper thread
and correctly install the bobbin
thread.
page 16, 18
The spool is incorrectly installed.
Correctly install the spool.
page 18
The combination of fabric, thread
and needle is not correct.
Select a thread and needle that are
appropriate for the type of fabric
being sewn.
page 30
The needle is bent or blunt.
Replace the needle.
page 31
If thin fabrics are being sewn, the
stitch is too coarse.
Shorten the stitch length or sew with
stabilizer material under the fabric.
page 52
The thread tension is incorrect.
Adjust the tension of the upper
thread.
page 50
Stitches are
skipped.
The upper thread was not threaded
correctly.
Correct the upper threading.
page 18
The combination of fabric, thread
and needle is not correct.
Select a thread and needle that are
appropriate for the type of fabric
being sewn.
page 30
The needle is bent or blunt.
Replace the needle.
page 31
The needle is incorrectly installed.
Correctly install the needle.
page 32
Dust has accumulated under the
needle plate or in the shuttle.
Remove the needle plate cover and
clean the shuttle.
page 100
A high-pitched
noise is made
while sewing.
Dust has accumulated in the feed
dogs or in the shuttle.
Clean the shuttle.
page 100
The upper thread was not threaded
correctly.
Correct the upper threading.
page 18
The shuttle is scratched, or has a
burr on it.
Replace the shuttle.
Contact your retailer or the nearest
authorized service center.
–
A bobbin designed specifically for
this machine is not used.
Incorrect bobbins will not work prop-
erly. Only use a bobbin designed spe-
cifically for this machine.
page 12
The thread does
not pass through
the eye of the
needle.
The needle was not raised.
The thread cassette indicator is lit in
red.
Press the needle position button. The
thread cassette indicator lights up in
green.
page 22
The needle is incorrectly installed.
Correctly install the needle.
page 32
The stitch is not
sewn correctly.
The presser foot that is used is not
appropriate for the type of stitch that
you wish to sew.
Attach the presser foot that is appro-
priate for the type of stitch that you
wish to sew.
page 96
The thread tension is incorrect.
Adjust the tension of the upper
thread.
page 50
The thread is tangled, for example,
in the shuttle.
Remove the tangle thread. If the
thread is tangled in the shuttle, clean
the shuttle.
page 100
Symptom
Probable Cause
Remedy
Reference