Brother International CS-8060 Users Manual - English - Page 45
Raise the presser foot lever., With a screwdriver, loosen the presser foot, holder screw
View all Brother International CS-8060 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
CONTENTS GETTING READY SEWING BASICS UTILITY STITCHES Raise the presser foot lever. 3 1 1 Presser foot lever X The presser foot is raised. With a screwdriver, loosen the presser foot 4 holder screw, and then remove the walking foot. 1 1 Presser foot holder screw Attach the presser foot holder. 5 • For details, refer to "Removing the presser foot holder" (page 37). Memo ● Only the straight stitch (with reinforcement stitching) and the zigzag stitch can be used with the walking foot. For details on the stitches, refer to "Stitch Settings" (page 96). Replacing the Presser Foot 39 APPENDIX INDEX
Replacing the Presser Foot
39
GETTING READY
CONTENTS
SEWING BASICS
UTILITY STITCHES
APPENDIX
INDEX
3
Raise the presser foot lever.
1
Presser foot lever
The presser foot is raised.
4
With a screwdriver, loosen the presser foot
holder screw, and then remove the walking
foot.
1
Presser foot holder screw
5
Attach the presser foot holder.
• For details, refer to “Removing the presser
foot holder” (page 37).
Memo
●
Only the straight stitch (with reinforcement
stitching) and the zigzag stitch can be used
with the walking foot. For details on the
stitches, refer to “Stitch Settings” (page 96).
1
1