Brother International CS-8060 Users Manual - English - Page 31
Thread the needle manually (without using the needle threader), Install a needle. - twin needle
View all Brother International CS-8060 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
CONTENTS GETTING READY SEWING BASICS UTILITY STITCHES Thread the thread cassette with the thread 4 from the spool on the extra spool pin. • For more details, refer to "Loading the spool into the thread cassette" (page 19). Insert the thread cassette (with the extra spool 5 pin attached) into the thread cassette compartment. Use both hands to press down on both sides of the extra spool pin. Thread the needle manually (without using the needle threader) When using special thread, thread with a thickness of 130/20 or less, the wing needle or the twin needle which cannot be used with the needle threader, thread the needle as described below. Remove the needle. 1 • Refer to "Replacing the needle" (page 32). • When using the wing needle, the twin needle or thread that cannot be used with the needle threader, be sure to remove the needle, otherwise the machine may be damaged. Check that the thread cassette indicator is lit 2 up in green, and then insert the thread cassette into the thread cassette compartment. • For details, refer to 1 through 2 (page 22). X Pass the thread through the needle bar thread hook. 1 X At the same time that the thread cassette is inserted, the needle is threaded. X The extra spool pin is now installed. 1 Needle bar thread hook Install a needle. 3 • Refer to "Replacing the needle" (page 32). Pass the thread through the eye of the needle 4 from front to back. APPENDIX INDEX Upper Threading 25