Brother International HL-2400C Users Manual - English - Page 132

CHAPTER 4 CONTROL PANEL 4. Press the Set button to make the displayed selection effective. The printer is reset according to the selected reset mode. Selected Mode RESET PRINTER RESET SETTING 1-2 FACTORY SETTINGS LCD message on the upper row  08 RESET TO USER SETTINGS  08 RESET TO SETTING # 1*  09 RESET TO FACTORY SETTINGS 1* - # indicates the selected number of saved settings The printer automatically exits from the reset mode to the on-line state. 5. When you enter the RESET PARTS LIFE mode; LCD Message on the lower row FC ROLLER OPC BELT FUSER UNIT 120K KIT Parts replaced Fuser Cleaner (OPC) Belt Cartridge Fixing Unit Drum Cleaner, Paper discharger, Transfer Roller The reset item is selected according to the Maintenance message that shows the currently recommended maintenance part to replace. Press Set to reset the parts life. List of Factory Settings The following table shows the factory settings made before shipment.  Notes  The settings are subject to the emulation mode. Effective modes are indicated in parentheses in the following table.  The following settings cannot be restored to the factory settings with the Reset button in the "FACTORY SETTINGS" mode: INTERFACE MODE, HRC SETTING, PAGE PROTECTION, SCALABLE FONT, LOCK PANEL, and PAGE COUNTER, and local language for display messages.  The COPY setting is always restored to the factory setting when the printer is turned off and on again.  The user settings are overwritten after resetting to setting 1 or 2. 4-69