Brother International HL-2400C Users Manual - English - Page 45

USER'S GUIDE Printing the Test Patterns or Lists You can check print quality and print a list of available fonts before you actually start working with the printer. To do so, follow these steps: 1. Make sure that you have already installed the toner cartridges, the (OPC) Belt Cartridge, the Oil Bottle and the Fuser Cleaner and have loaded paper into the cassette. Make sure that you have removed the protective parts on the Waste Toner Pack. 2 Turn on the printer. Wait until the display shows the message as follows. LJ READY 001P T1 AUTO



K C MY 3. Press the Sel button to set the printer off-line. The On Line LED goes off. 4. Hold down the Shift button and press the Test button. 5. Press the v or w button to scroll through the display until the desired message appears. To print your selection, press the Set button. Choose from one of the following selections : To Print Out the Demonstration Page the Test Pattern the list of printer settings the list of internal or resident fonts the list of optional cartridge/card fonts the list of permanent download fonts LCD Message in the Second Row DEMO PAGE TEST PRINT PRINT CONFIG PRINT FONTS I PRINT FONTS C PRINT FONTS P To exit from the test mode, select "exit".  Notes The messages "PRINT FONTS C" or "PRINT FONTS P" appear only when an optional font cartridge/card is installed in the font slot or permanent download fonts are stored in printer memory respectively.  If the optional font cartridge/card is installed, you can print out a list of optional fonts. Since the list shows the ID numbers specific to each optional font, it helps you to select them with the Font button. For further information, see "FONT Button" in Chapter 4.  If user-defined characters are already downloaded into the printer memory as permanent download fonts, you can print out a list of them. For further information, see "FONT Button" in Chapter 4. 2-18