Brother International HL-2400C Users Manual - English - Page 72
MODE Button Settings in HP PCL5C, EPSON FX-850, and IBM, Proprinter XL Modes
View all Brother International HL-2400C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
CHAPTER 4 CONTROL PANEL MODE Button Settings in HP PCL5C, EPSON FX-850, and IBM Proprinter XL Modes The following table shows all the selections you can make with the Mode button in the HP PCL5C, EPSON FX-850, and IBM Proprinter XL modes. Note The mode menus and settings that can appear vary according to the current emulation mode, printer status, and any options that may be installed in the printer. Mode Menu INTERFACE MODE Setting Menu I/F=PARALLEL I/F=RS-232C I/F=EXPAND I/O I/F=AUTO Sub-Setting Menu Setting HIGH SPEED=ON ON or OFF BI-DIR=ON ON or OFF exit Exit to INTERFACE MODE BaudRate= 9600 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, or 115200 baud CodeType=8 bits 7 or 8 bits Parity =NONE NONE, EVEN, or ODD Stop Bit=1 bits 1 or 2 stop bits Xon/Xoff=ON ON or OFF DTR (ER)=ON ON or OFF Robust Xon=OFF ON or OFF exit Exit to INTERFACE MODE Available only when a commercial MIO card has been installed. MIO Setting The settings available on the installed MIO card can appear under the sub-setting menu. exit Exit to INTERFACE MODE TIME OUT= 5s 1 to 99 seconds PRL Setting Bi-directional settings for AUTO HIGH SPEED=ON ON or OFF BI-DIR=ON ON or OFF exit Exit to PRL Setting RS-232C Setting Parameters for AUTO mode BaudRate= 9600 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, or 115200 baud CodeType=8 bits 7 or 8 bits Parity =NONE NONE, EVEN, or ODD Stop Bit=1 bits 1 or 2 stop bits Xon/Xoff=ON ON or OFF DTR (ER)=ON ON or OFF Robust Xon=OFF ON or OFF exit Exit to RS-232C Setting 4-9