Brother International HL-2400C Users Manual - English - Page 36
Installing the Oil Bottle and the Fuser Cleaner
View all Brother International HL-2400C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
CHAPTER 2 SETTING UP THE PRINTER Installing the Oil Bottle and the Fuser Cleaner 1. Release the Fusing unit pressure a little with the Pressure Release Levers ( ). Then pull the orange protective parts between the rollers of the Fusing Unit out to remove them ( ). Make sure that the Pressure Release Levers are locked. Fig. 2-13 Remove the Protective Parts 2. Install the Oil Bottle into the Fusing Unit with the label side facing the front of the printer. Fig. 2-14 Install the Oil Bottle ! Caution Do not spill the oil inside the printer. If the oil does spill, it might cause damage to the printer. If you do spill any oil, consult your dealer or our authorized service representative. 2-9
CHAPTER 2 SETTING UP THE PRINTER
2–9
Installing the Oil Bottle and the Fuser Cleaner
1.
Release the Fusing unit pressure a little with the Pressure Release
Levers (
). Then pull the orange protective parts between the rollers
of the Fusing Unit out to remove them (
). Make sure that the
Pressure Release Levers are locked.
Fig. 2-13
Remove the Protective Parts
2.
Install the Oil Bottle into the Fusing Unit with the label side facing the
front of the printer.
Fig. 2-14
Install the Oil Bottle
!
Caution
Do not spill the oil inside the printer. If the oil does spill, it might cause
damage to the printer. If you do spill any oil, consult your dealer or our
authorized service representative.