Brother International HL-2400C Users Manual - English - Page 98
your FORMS software package to SEND DATA ONLY - USE FORM
View all Brother International HL-2400C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
CHAPTER 4 CONTROL PANEL Note A common use of the flash memory is with FORMS software packages. With these commercially available software packages you have an option to send a form to the printer without any data. After you have sent the form to the printer, you may save the form in the flash memory as a Macro. Then the next time you want to print this form, you would setup your FORMS software package to SEND DATA ONLY - USE FORM IN PRINTER. This process would save you anything from 1 to 4 minutes per print job. Select the setting menu and enter the sub-setting menu to change the settings as follows: s Execute Data Note This menu appears only when data has been saved on the card. When you select "EXECUTE DATA," you can execute any of the data saved in the SAVE DATA mode. When you enter this sub-setting menu with the Set button, the printer prompts you to select the ID of the data. Select the ID with the v or w button and press the Set button again, so that the printer executes the selected data. s Card List When you select "CARD LIST" and you press the Set button, the printer automatically loads paper and starts printing the contents of the installed flash memory card or HDD card. You can check the contents and the unused capacity of the card. 4-35