Brother International HL-2400C Users Manual - English - Page 150
Fuser Cleaner
View all Brother International HL-2400C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
CHAPTER 5 MAINTENANCE Fuser Cleaner Fuser Cleaner Message When the following message appears on the LCD panel, you need to prepare a new Fuser Cleaner. REPLACE FCR Fuser Cleaner Change Message When the following message appears on the LCD panel and the printer stops printing, you need to replace the Fuser Cleaner. 24 CHANGE FCR Replacing the Fuser Cleaner Warning The Fusing unit and the parts around it are HOT. Be sure to wait about 30 minutes before you start replacing the Fuser Cleaner. If you touch the HOT parts, you might get injured. 1. Press the Power button to turn the printer off and wait until it cools down for approximately 30 minutes. 2. Open the Top cover. 3. Release the Oil Bottle Lock Levers on both sides as shown below. Fig. 5-6 Release the Levers 5-9