Brother International HL-L8350CDW Users Guide - Page 10

Printing Methods Paper Tray Capacity Paper Tray (Tray 1) Multi-purpose Tray (MP Tray) Paper size Letter, A4, Legal, B5 (JIS), Executive, A5, A5 (Long Edge), A6, Folio 1 Width: 3.0 to 8.5 in. (76.2 to 215.9 mm) Length: 5 to 14 in. (127 to 355.6 mm) Optional Lower Tray Letter, A4, Legal, B5(JIS), (Tray 2) 3 Executive, A5, Folio 1 Paper types Plain Paper, Thin Paper and Recycled Paper No. of sheets up to 250 sheets 20 lb (80 g/m2) Plain Paper, Thin Paper, up to 50 sheets Thick Paper, Thicker Paper, Recycled Paper, Bond Paper, 20 lb (80 g/m2) Labels, Envelopes, Env. Thin, 3 Envelopes Env.Thick and Glossy Paper 2 1 Glossy paper Plain Paper, Thin Paper and up to 500 sheets Recycled Paper 20 lb (80 g/m2) 1 Folio size is 8.5 in.  13 in. (215.9 mm x 330.2 mm). 2 Load only one sheet of Glossy in the MP tray. 3 Tray 2 is standard on HL-L8350CDWT. Recommended paper specifications The following paper specifications are appropriate for this machine: 1 1 Basis Weight Thickness Roughness Stiffness Grain Direction Volume Resistivity Surface Resistivity Filler Ash Content Brightness Opacity 20-24 lb (75-90 g/m2) 80-110 m Higher than 20 sec. 90-150 cm3/100 Long Grain 10e9-10e11 ohm 10e9-10e12 ohm-cm CaCO3 (Neutral) Below 23 wt% Higher than 80% Higher than 85%  Use plain paper that is appropriate for laser machines to make copies.  Use paper that is 20 to 24 lb (75 to 90 g/m2).  Use long grain paper with a neutral Ph value, and a moisture content of approx. 5%.  This machine can use recycled paper that meets DIN 19309 specifications. (Before you load paper in this machine, see Important information for choosing your paper on page 208.) 3