Brother International HL-L8350CDW Users Guide - Page 105
Network for HL-L8350CDW and HL-L8350CDWT continued
View all Brother International HL-L8350CDW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
General Information Network for HL-L8350CDW and HL-L8350CDWT (continued) Submenu 1 WLAN Submenu 2 Menu Selections Options Descriptions TCP/IP Boot Method Auto* / Static / RARP / BOOTP / DHCP Chooses the IP method that best suits your needs. IP Address Enter the IP address. (000.000.000.000)* 1 3 Subnet Mask Enter the Subnet mask. (000.000.000.000)* 1 Gateway Enter the Gateway (000.000.000.000)* 1 address. IP Boot Tries 0 / 1 / 2 / 3* / ... / 32767 Specifies the number of attempts the machine will try to obtain an IP address when the Boot Method is set to any setting except Static. APIPA On* / Off Automatically allocates the IP address from the link-local address range. 1 IPv6 On / Off* Enables or Disables the IPv6 protocol. WLAN Assistant - - You can configure your wireless network settings using the Brother CD-ROM. Setup Wizard - - Configures the wireless network settings using the setup wizard. WPS/AOSS - - Configures the wireless network settings using WPS or AOSS™ method. WPS w/PIN Code - - Configures the wireless network settings using WPS with a PIN code. The factory settings are shown in Bold with an asterisk. 98