Brother International HL-L8350CDW Users Guide - Page 104
Network for HL-L8350CDW and HL-L8350CDWT
View all Brother International HL-L8350CDW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
General Information Network for HL-L8350CDW and HL-L8350CDWT Submenu 1 Submenu 2 Menu Selections Options Descriptions Wired LAN (HL-L8350CDW and HL-L8350CDWT) TCP/IP Boot Method Auto* / Static / RARP / BOOTP / DHCP Chooses the IP method that best suits your needs. IP Address Enter the IP address. 3 (000.000.000.000)* 1 Subnet Mask Enter the Subnet mask. (000.000.000.000)* 1 Gateway Enter the Gateway (000.000.000.000)* 1 address. IP Boot Tries 0 / 1 / 2 / 3* / ... / 32767 Specifies the number of attempts the machine will try to obtain an IP address when the Boot Method is set to any setting except Static. APIPA On* / Off Automatically allocates the IP address from the link-local address range. 1 IPv6 On / Off* Enables or disables the IPv6 protocol. Ethernet - Auto* / 100B-FD / 100B-HD / 10B-FD / 10B-HD Chooses Ethernet link mode. Wired Status - Active 100B-FD / Active 100B-HD / Active 10B-FD / Active 10B-HD / Inactive / Wired OFF Displays Ethernet link status. MAC Address - - Displays MAC address of the machine. Set to Default Restores wired network settings of the internal print server to the factory settings. Wired Enable - On* / Off Chooses Ethernet link mode. The factory settings are shown in Bold with an asterisk. 97