Brother International HL-L8350CDW Users Guide - Page 99
General Setup, Submenu, Menu Selections, Options, Descriptions
View all Brother International HL-L8350CDW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
General Information General Setup Submenu Local Language Ecology Panel Control Setting Lock Interface Menu Selections Options Descriptions - English* / Français... Select the LCD language for your country. Toner Save Sleep Time On / Off* Increases the page yield of the toner cartridge. 3 0 / 1 / 2 / 3* / 4 / 5 / ... Min Set the time to return to Power Save mode. Quiet Mode On / Off* Decreases printing noise. Auto Power Off Off* / 1 hour / 2 hours / 4 hours / 8 hours Sets the number of hours that the machine will remain in Deep Sleep mode before going into Power Off mode. Choose Off if you do not want the machine to go into Power Off mode. Button Repeat 0.1* / 0.4 / 0.6 / 0.8 / 1.0 / 1.4 / 1.8 / 2.0 Sec Sets the time for the LCD message to change when holding a or b at intervals. Message Scroll Level1* / Level2 / ... / Level10 Sets the time in seconds that an LCD message will scroll across the LCD. From Level 1=0.2 sec to Level 10=2.0 sec. LCD Contrast -nnonn+ Adjusts the contrast of the LCD. Auto Online On* / Off Set the machine to return to Ready mode after it has been idle for 30 seconds. If you select Off, the machine cannot receive print jobs if it has been left in Menu mode. - On / Off* Turn the lock panel settings On or Off by using the password. Select Auto* / USB / Network Choose the interface to use. If you select Auto, the machine changes the interface to USB or Ethernet depending on which interface is receiving data. Auto IF Time 1 / 2 / 3 / 4 / 5* / ... / 99Sec You must set the time-out period for the auto interface selection. Input Buffer Level 1 / 2 / 3 / 4* / ... / 7 Increases or decreases the input buffer capacity. The factory settings are shown in Bold with an asterisk. 92