Brother International HL-L8350CDW Users Guide - Page 196

Troubleshooting Printing difficulties (continued) Difficulties Suggestions No printout. Check that the machine is not in Power Off mode. (Continued) If the machine is in Power Off mode, press send the print job. on the control panel, and then re- (See Auto Power Off on page 109.) The machine is not printing or has stopped printing. Press Cancel. The machine will cancel the print job and clear it from the memory. The printout may be incomplete. The headers or footers appear There is an unprintable area on the top and bottom of the page. Adjust the top and when the document is bottom margins in your document to allow for this. displayed on the screen but (See Unprintable area when printing from a computer on page 7.) they are not on the printed 6 page. The machine prints unexpectedly or it prints garbage. Press Cancel to cancel the print jobs. Check the settings in your application to make sure they are set to work with your machine. The machine prints the first couple of pages correctly, then some pages have text missing. Check the settings in your application to make sure that they are set to work with your machine. Your computer is not recognizing the machine's input buffer's full signal. Make sure the interface cable is connected correctly. Cannot perform 'Page Layout' Check that the paper size settings in the application and in the printer driver are the printing. same. Print speed is too slow. Try changing the printer driver setting. The highest quality takes longer data processing, sending and printing time. If the machine is in Quiet mode, print speed is slower. Check the Quiet mode setting. (See Turning Quiet mode on/off on page 110.) The machine does not print from Adobe® Illustrator®. Reduce the print quality. (For Windows, see Basic tab on page 33.) (For Macintosh, see Print Settings on page 71.) Poor print quality See Improving the print quality on page 192. Paper handling difficulties Difficulties The machine does not feed paper. Suggestions If the paper tray is empty, load a new stack of paper in the paper tray. If there is paper in the paper tray, make sure it is straight. If the paper is curled, straighten it. Sometimes it is helpful to remove the paper, turn the stack over and put it back in the paper tray. Reduce the amount of paper in the paper tray, and then try again. Make sure that MP Tray mode is not selected in the printer driver. Clean the paper pick-up roller. (See Cleaning the paper pick-up roller on page 164.) 189