Brother International Innov-ís 1500D Users Manual - English - Page 114

e Press . → The carriage moves to its initial position. BEFORE EMBROIDERING ■ Removing the Embroidery Unit a Press or , and then press . → The carriage moves to the storage position. CAUTION • Always remove the embroidery frame before pressing . Otherwise, the frame may strike the embroidery foot, and possibly cause injury. • The embroidery unit will not fit in the storage box/case if this step is not done. Note If the carriage does not move to the storage position, the embroidery unit cannot be put into its storage box/ case. b Turn off the machine. CAUTION Note Be sure to turn off the machine before removing the • Keep your hands and foreign objects away from the embroidery carriage and frame when the machine is embroidery unit, otherwise damage to the machine may result. embroidering. Otherwise, injury may result. Note c Press the release button under the end of the embroidery unit, and then pull the unit away 5 from the machine. If the machine was not initialized correctly, the initial screen may not appear. This is not a sign of a malfunction. If this occurs, turn the machine off, then on again. Embroidery f The message will disappear after 15 seconds or press to move to the next step. a Note A confirmation message to lower the frame-securing lever after the carriage moves to its initial position is displayed. Continue with pattern selection and remember to lower the frame-securing lever when the embroidery frame is attached. → Pattern selection screen appears. a Release button CAUTION • Do not carry the embroidery unit by holding the release button compartment. 113