Brother International Innov-ís 1500D Users Manual - English - Page 28
Setting the Bobbin, Pulling Up the Bobbin Thread
View all Brother International Innov-ís 1500D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
LOWER/UPPER THREADING Setting the Bobbin e Lightly hold down the bobbin with your right hand, and then, while slightly pulling the thread with your left hand, guide it through This section describes how to set a bobbin wound with the groove. thread into the machine. You can begin sewing without pulling up the bobbin thread. If you wish to pull up the bobbin thread, for example, when sewing gathers, 1 follow the procedure described in the next section. Getting Ready CAUTION • Use a bobbin thread that has been correctly wound. Otherwise, the needle may break or the thread tension will be incorrect. f After guiding the thread completely through the groove, pull it toward you to cut it with the cutter. a Press the "Presser Foot Lifter" button to raise the presser foot. b Slide the bobbin cover latch to the right, and then remove the bobbin cover. a b a a Cutter g Attach the bobbin cover by inserting the tab in the lower-left corner of the bobbin cover, then lightly press down on the right side of the cover until it snaps into place. a Bobbin cover b Latch c Hold the bobbin with your right hand and hold the end of the thread with your left hand. d Insert the wound bobbin into the bobbin case so that the thread unwinds in the direction of the arrow. CAUTION • Be sure to hold down the bobbin with your finger and unwind the bobbin thread correctly. Otherwise, the thread may break or the thread tension will be incorrect. a a Tab Pulling Up the Bobbin Thread There may be some sewing applications where you may want to pull up the bobbin thread, for example, when making gathers or with free-motion quilting. Follow the procedure described below to pull up the bobbin thread. Memo Thread the upper thread before pulling up the bobbin thread. For details, see "Upper Threading" on page 28. a Follow steps a through d from the previous section to insert the bobbin into the bobbin case. 27