Brother International Innov-ís 1500D Users Manual - English - Page 76
foot, and then insert the button that will
View all Brother International Innov-ís 1500D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
a Select a stitch, and then attach presser foot "A". b Mark the position and length of the buttonhole on the fabric. Memo The maximum buttonhole length is 28 mm (approx. 11/6 inches) (diameter + thickness of the button). SEWING THE STITCHES d Hold the outside frame of the buttonhole foot toward the back with your finger, and then lower the presser foot so that the mark on the fabric aligns with the marks on the buttonhole foot. a Ab c Pull out the button holder plate on the presser foot, and then insert the button that will be put through the buttonhole. * The size of the buttonhole is set by clamping the button in the button holder plate. a Mark on fabric b Marks on presser foot Note 3 • Slide the outside frame of the buttonhole foot backward as far as possible, making sure that there is no gap behind the part of the foot marked "A", as shown in the illustration. If the buttonhole foot is not slid back as far as possible, the buttonhole will not be sewn at the correct size. • Pass the thread under the presser foot. Utility Stitches Note Pass the thread under the presser foot. e Pull down the buttonhole lever. * The buttonhole lever should be positioned behind the metal bracket on the buttonhole foot, as shown in the illustration. a a a a Button holder plate a Buttonhole lever a a Metal bracket 75