Brother International Innov-ís 1500D Users Manual - English - Page 123
Inserting the Fabric, Using the Embroidery Sheet
![]() |
View all Brother International Innov-ís 1500D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
PREPARING THE FABRIC ■ Inserting the Fabric Note If the fabric is not taut, the pattern may be misaligned or the fabric may pucker. Follow the procedure described below to gently stretch the fabric in the embroidery frame so that the fabric is not loose. In addition, be sure to work on a level surface when hooping the fabric in the embroidery frame. d Gently stretch the fabric, and then securely tighten the frame adjustment screw so that the fabric remains stretched. a Lift up screw, and and loosen the frame adjustment then remove the inner frame. a b a Inner frame b Frame adjustment screw b Lay the fabric right side up on top of the outer frame, and then place the inner frame on top. * Be sure to align on the inner frame with on the outer frame. a b * Make sure that the edges of the inner and outer frames are aligned. a b c a Outer frame b Inner frame c Wrong side of fabric Memo • After stretching the fabric, lightly tapping it should produce a drum-like sound. • While stretching the fabric from all four corners and all four edges, securely tighten the frame adjustment screw. e Return the frame original position. adjustment screw to its c a Inner frame b Outer frame c Frame adjustment screw c Slightly tighten the frame adjustment screw, and then gently pull the edges of the fabric to remove any slack. ■ Using the Embroidery Sheet When you want to embroider the pattern at a particular location, use the embroidery sheet to hoop the fabric in the embroidery frame. a Mark the area embroidered. of the fabric to be a b a Embroidery pattern b Mark 122
![](/manual_guide/products/brother-international-innov237s-1500d-users-manual-english-bcaf2a3/123.png)